Ditto. Essentially the same problem here on upgrading to 5.50. I have
not been as comprehensive in my analysis as Classe was, but essentially
the same findings. What it means is that fldigi (for instance) can no
longer decode CW keyed into the K3, which it used to do.
But it's nice to know that the problem seems to be a new "feature"!
George, W3HBM
On 9/8/2016 11:40 AM, Classe Bergman wrote:
> Hi,
> Today I upgraded my K3 with new FW, I was using 5.38/2.86 and I installed
> 5.50/2.87
> I then discovered that the CW Monitor audio was lost on Lin Out. First I
> tought that some settings was messed up but could not find anything. I
> then downgraded my K3 to 5.38/2.86 and the CW Monitor audio was back ! I
> found that if I change settings from LIN OUT = "Nor"as I normaly use to
> "=Phones", the CW Monitor audio comes back. So something have changed the
> function of Line Out audio in the new FW release.
> Since all audio levels follows the Front AF vol when using "=Phones" this
> mess up levels to my soundcard in the PC. My K3 s/n 1464 have the old KIO
> board without USB interface
>
> Is this a known bug ( or maybe a feature ..) ?
>
> 73 Classe SM3GSK
> ______________________________________________________________
> Elecraft mailing list
> Home:
http://mailman.qth.net/mailman/listinfo/elecraft> Help:
http://mailman.qth.net/mmfaq.htm> Post: mailto:
[hidden email]
>
> This list hosted by:
http://www.qsl.net> Please help support this email list:
http://www.qsl.net/donate.html> Message delivered to
[hidden email]
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.htmlMessage delivered to
[hidden email]
Locked
