CW Sidetone Pitch remote change

[Rooby]

Hello

how can I change the CW Sidetone Pitch via the remote interface?
I want to set it to a absolute value e.g. 550Hz.
Unfortunately the CW command is only for reading.

[vk2rq]

Which radio?

73, Matt VK2RQ

> On 1 Jul 2014, at 4:59 pm, Rooby <[hidden email]> wrote:
>
> Hello
>
> how can I change the CW Sidetone Pitch via the remote interface?
> I want to set it to a absolute value e.g. 550Hz.
> Unfortunately the CW command is only for reading.
>
>
>
>
> --
> View this message in context: http://elecraft.365791.n2.nabble.com/CW-Sidetone-Pitch-remote-change-tp7590762.html
> Sent from the Elecraft mailing list archive at Nabble.com.
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to [hidden email]

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[Rooby]

sorry forgot, KX3

[vk2rq]

If you were talking K2, then I was going to say it may be possible with SW command, but not really recommended since you may have to realign your filters. Then again, if you store the alignment values for different pitches in advance...

But since you talk about KX3, then it seems you are indeed out of luck. I can understand why you might want to set the pitch programmatically if, for example, you are trying to fully automate the extended calibration/temperature compensation procedures.

73,
Matt VK2RQ

> On 1 Jul 2014, at 5:53 pm, Rooby <[hidden email]> wrote:
>
> sorry forgot, KX3
>
>
>
> --
> View this message in context: http://elecraft.365791.n2.nabble.com/CW-Sidetone-Pitch-remote-change-tp7590762p7590764.html
> Sent from the Elecraft mailing list archive at Nabble.com.
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to [hidden email]

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[Rooby]

Thanks for your reply,
Yes you are correct I would like to automate the sideband suppression procedure and there it is stated to set the CW sidetone pitch to 550Hz which I have no idea how to do this remotely.
I did not find any way to do in the programmers guide.

[Dick Dievendorff-4]

Page 8 of the Programmer's Reference.

CW (CW Sidetone Pitch; GET only) RSP format: CWxx; where xx is 30-80
(sidetone pitch in 10 Hz units).

73 de Dick, K6KR

-----Original Message-----
From: Elecraft [mailto:[hidden email]] On Behalf Of Rooby
Sent: Tuesday, July 01, 2014 4:25 AM
Yes you are correct I would like to automate the sideband suppression
procedure and there it is stated to set the CW sidetone pitch to 550Hz which
I have no idea how to do this remotely.
I did not find any way to do in the programmers guide.



 

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[Rooby]

Yes CW command is possible but only for reading not for setting the value.

[Dick Dievendorff-4]

I see that now. Sorry for not reading carefully enough.

Dick

-----Original Message-----
From: Elecraft [mailto:[hidden email]] On Behalf Of Rooby
Sent: Tuesday, July 01, 2014 6:08 AM
To: [hidden email]
Subject: Re: [Elecraft] CW Sidetone Pitch remote change

Yes CW command is possible but only for reading not for setting the value.



--
View this message in context:
http://elecraft.365791.n2.nabble.com/CW-Sidetone-Pitch-remote-change-tp75907
62p7590772.html
Sent from the Elecraft mailing list archive at Nabble.com.
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html Message
delivered to [hidden email]

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]