Thanks to all those who indicated participation in the CW Sweepstakes this
weekend. Below are some Elecraft powered stations to look for along with their power level and section. See you all this afternoon! KX1E A ME N2WN Q TN AA4AK Q ME N4OGW A MS K5WA A STX NK8Q Q EPA N9NE Q WI AC0DS Q CO K0NDX A ND N0SS Q MO NZ0R A IA 73 ... Craig AC0DS _______________________________________________ Elecraft mailing list Post to: [hidden email] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com |
Hi all.
I have a XV-144 here which was not built by me. But all parts seem to be in order. DIP switches are OK. No issue on power up. LO voltage level seems OK. Problem is adjusting R13, even at full CCW rotation I cannot get the voltage below 284mV. I had a look around and it seems the parts are in the right places. On my K2 when it powers up I hear some relay clicks, should I hear the same on the XV-144? A lot of the paths will depend on the relay status and I hear nothing at start-up from the XV-144. So I am wondering if it has a control issue first of all. Any help appreciated John _______________________________________________ Elecraft mailing list Post to: [hidden email] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com |
In reply to this post by Craig Smith
I only managed to get in 10 hours this year but I improved my hourly rate
over last year so at least I accomplished something. I worked AA4AK, N4OGW, K5WA, and N9NE from the Elecraft list. The K2 worked great with WriteLog. I've had problems in the past where WriteLog would lose comm with the K2 and I had to reboot one or both to get it back up. There were no problems like that this time. A hastily constructed 80m dipole got me through the night with periods of 60/hour. (Starting with a trip to Lowes for #10 wire at 2030Z.) I got started two hours late because of that, but it was a welcome change from last year when I was stuck on 40m all night. Craig NZ0R K2/100 #4941 K1 #1966 KX1 #1499 -----Original Message----- From: [hidden email] [mailto:[hidden email]] On Behalf Of Craig D. Smith Sent: Saturday, November 04, 2006 10:34 AM To: [hidden email] Subject: [Elecraft] CW Sweepstakes Elecraft Participants Thanks to all those who indicated participation in the CW Sweepstakes this weekend. Below are some Elecraft powered stations to look for along with their power level and section. See you all this afternoon! KX1E A ME N2WN Q TN AA4AK Q ME * N4OGW A MS * K5WA A STX * NK8Q Q EPA N9NE Q WI * AC0DS Q CO K0NDX A ND N0SS Q MO NZ0R A IA 73 ... Craig AC0DS _______________________________________________ Elecraft mailing list Post to: [hidden email] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com _______________________________________________ Elecraft mailing list Post to: [hidden email] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com |
In reply to this post by Craig Smith
Here's another SS report. I did my fifth best ever (out of 33 SS contests) and the best in the four years since I've been using the K2, so I'm happy. Especially since the K2 was not working right up until last Thursday (needed new diodes in the PA100 SWR circuit). I worked N4OGW and K5WA from NZ0R's list. Before ARRL's log checking I have about 82K points, and got a lot more of 'em on 80 than I have for years. It was nice to have 80 in good shape - it's never actually quiet here (I live right in town) but it was so much better than usual that it really made the contest a lot more fun. I family QRM permits, maybe I'll see some of you in the SSB contest in a couple of weeks. 73, Bob KX1E _______________________________________________ Elecraft mailing list Post to: [hidden email] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com |
Free forum by Nabble | Edit this page |