CW Tune Led for Elecraft K2/K1

classic Classic list List threaded Threaded
10 messages Options
Reply | Threaded
Open this post in threaded view
|

CW Tune Led for Elecraft K2/K1

iw2noy
Hello,

someone out there still have the kit for CE Tune Led modification for
the Elecraft K2 (or K1) ?
Or any information where is possible to find it ?

Thanks a lot, Graziano IW2NOY / W2NOY
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]
Reply | Threaded
Open this post in threaded view
|

Re: [K1]CW Tune Led for Elecraft K2/K1

Elecraft mailing list
Hi,It took awhile to find this site. You will have to dig though it. http://www.mmccs.com/mmarc/n0ss/I hope this helps,73    Jim H  k7sss In a message dated 10/15/2020 6:10:40 AM Pacific Standard Time, [hidden email] writes: 
Hello, someone out there still have the kit for CE Tune Led modification for the Elecraft K2 (or K1) ?Or any information where is possible to find it ? Thanks a lot, Graziano IW2NOY / W2NOY 
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]
Reply | Threaded
Open this post in threaded view
|

Re: [K1]CW Tune Led for Elecraft K2/K1

Don Wilhelm
Despite what hat website says, there are no kits available.  Tom Hammond
was SK several years ago, but his local radio club has preserved the
content on his website.
All the instructions are there, and I believe Tom used FAR Circuits for
his boards.  An email to FAR Circuits may turn up a board for you.

73,
Don W3FPR

On 10/15/2020 12:59 PM, Jim H via Elecraft wrote:
> Hi,It took awhile to find this site. You will have to dig though it. http://www.mmccs.com/mmarc/n0ss/I hope this helps,73    Jim H  k7sss In a message dated 10/15/2020 6:10:40 AM Pacific Standard Time, [hidden email] writes:
> Hello, someone out there still have the kit for CE Tune Led modification for the Elecraft K2 (or K1) ?Or any information where is possible to find it ? Thanks a lot, Graziano IW2NOY / W2NOY
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]
Reply | Threaded
Open this post in threaded view
|

Re: [K1]CW Tune Led for Elecraft K2/K1

ke9uw
I have two of these kits, unbuilt. I never got around to installing one in my K2. I would be willing to let go of one of them...

Anybody know what they sold for back in '07 I guess?

Chuck Hawley
 [hidden email]

 Amateur Radio, KE9UW
 aka Jack, BMW Motorcycles

________________________________
From: [hidden email] <[hidden email]> on behalf of Don Wilhelm <[hidden email]>
Sent: Thursday, October 15, 2020 12:32 PM
To: [hidden email] <[hidden email]>; [hidden email] <[hidden email]>; [hidden email] <[hidden email]>
Subject: Re: [Elecraft] [K1]CW Tune Led for Elecraft K2/K1

Despite what hat website says, there are no kits available.  Tom Hammond
was SK several years ago, but his local radio club has preserved the
content on his website.
All the instructions are there, and I believe Tom used FAR Circuits for
his boards.  An email to FAR Circuits may turn up a board for you.

73,
Don W3FPR

On 10/15/2020 12:59 PM, Jim H via Elecraft wrote:
> Hi,It took awhile to find this site. You will have to dig though it. http://www.mmccs.com/mmarc/n0ss/I hope this helps,73    Jim H  k7sss In a message dated 10/15/2020 6:10:40 AM Pacific Standard Time, [hidden email] writes:
> Hello, someone out there still have the kit for CE Tune Led modification for the Elecraft K2 (or K1) ?Or any information where is possible to find it ? Thanks a lot, Graziano IW2NOY / W2NOY
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]
Chuck, KE9UW
Reply | Threaded
Open this post in threaded view
|

Re: [K1]CW Tune Led for Elecraft K2/K1

KENT TRIMBLE
In reply to this post by Don Wilhelm
Hi Don . . .

For your future quick reference, and anybody else who might want it, the
direct link to the NØSS (Tom Hammond) articles on our club's website is:

http://www.mmccs.com/mmarc/n0ss/

73,

Kent Trimble, K9ZTV
NØSS Trustee
Mid-MO ARC
Jefferson City, MO



On 10/15/2020 12:32 PM, Don Wilhelm wrote:
> Despite what hat website says, there are no kits available.  Tom
> Hammond was SK several years ago, but his local radio club has
> preserved the content on his website.
> All the instructions are there, and I believe Tom used FAR Circuits
> for his boards.  An email to FAR Circuits may turn up a board for you.
>
> 73,
> Don W3FPR



--
This email has been checked for viruses by AVG.
https://www.avg.com
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]
Reply | Threaded
Open this post in threaded view
|

Re: [K1]CW Tune Led for Elecraft K2/K1

Don Wilhelm
Thanks Kent,

I already have that in my bookmarks and refer to it often.
Thanks to you and your club (especially Jim Biggerstaff) for maintaining
the website contents.
There is a lot of value there, especially for K1 and K2 owners.
I also have much of the information here on my networked hard drive.

73,
Don W3FPR

On 10/15/2020 3:53 PM, KENT TRIMBLE wrote:

> Hi Don . . .
>
> For your future quick reference, and anybody else who might want it,
> the direct link to the NØSS (Tom Hammond) articles on our club's
> website is:
>
> http://www.mmccs.com/mmarc/n0ss/
>
> 73,
>
> Kent Trimble, K9ZTV
> NØSS Trustee
> Mid-MO ARC
> Jefferson City, MO
>
>
>
> On 10/15/2020 12:32 PM, Don Wilhelm wrote:
>> Despite what hat website says, there are no kits available.  Tom
>> Hammond was SK several years ago, but his local radio club has
>> preserved the content on his website.
>> All the instructions are there, and I believe Tom used FAR Circuits
>> for his boards.  An email to FAR Circuits may turn up a board for you.

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]
Reply | Threaded
Open this post in threaded view
|

Re: CW Tune Led for Elecraft K2/K1

Geert Jan de Groot
In reply to this post by iw2noy
On 15/10/2020 18:37, [hidden email] wrote:
> someone out there still have the kit for CE Tune Led modification for
> the Elecraft K2 (or K1) ?
> Or any information where is possible to find it ?

Last year, I found a kit offered by WB3AAL and I ordered. Unfortunately,
I learned later that Ronald became SK in 2018, but the order page was
still up at the time I ordered and I didn't find his passing on the
reflector either.

I think many people enjoy the kits Ronald made and I am very sorry to
have learned that I was too late. At least, if you "find" the kit
offering, you know not to try this.

73,

Geert Jan PE1HZG
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]
Reply | Threaded
Open this post in threaded view
|

Re: CW Tune Led for Elecraft K2/K1

Don Wilhelm
Geert,

The kits that Ron WB3AAL (SK) offered were exactly the same kit as Tom
Hammond N0SS (SK) offered.  Tom passed the baton to Ron for the kits
some long time ago (2015 or 2016).  Ron added nothing, and in fact
offered Tom's documentation for the instructions.  One thing that Ron
did add was the option for an LED in a keycap - the origin of that idea
was mine, but I never documented it.  LA3ZA did document my work (plus a
bit more), see
https://la3za.blogspot.com/2011/05/five-k2-leds-in-buttons.html for
details.

Unfortunately, stuff stays on the internet for a long time, even when
the originators have sadly gone SK and their kits are no longer available.

I had frequent email interactions with Ron while he was selling the kits
- none bad, but always informative.  I built and installed many of those
kits for my customers.

If anyone would like to "pick up the pieces" and begin supplying these
kits, I am certain there would be many 'takers'.  I believe FAR Circuits
can supply the boards, and if that is not possible, Tom's documentation
has full size board layouts for anyone wanting to make their own boards.

73,
Don W3FPR

On 10/15/2020 6:25 PM, Geert Jan de Groot wrote:

> On 15/10/2020 18:37, [hidden email] wrote:
>> someone out there still have the kit for CE Tune Led modification for
>> the Elecraft K2 (or K1) ?
>> Or any information where is possible to find it ?
>
> Last year, I found a kit offered by WB3AAL and I ordered. Unfortunately,
> I learned later that Ronald became SK in 2018, but the order page was
> still up at the time I ordered and I didn't find his passing on the
> reflector either.
>
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]
Reply | Threaded
Open this post in threaded view
|

Re: [K1]CW Tune Led for Elecraft K2/K1

Elecraft mailing list
In reply to this post by iw2noy
Fred KF9GX at FAR Circuits does have them, they're four bucks each plus 3.50 for shipping up to ten. (Possibly more outside the US.) Thanks Don for pointing this out!



I believe it's the SMD version which is fun to assemble if you're a masochist! If someone gets around to ordering the parts to go along with the board, it would be great if they could post the list here. I believe the chip is obsolete but still available.



[hidden email]


Doug, W0UHU.



Message: 4
Date: Thu, 15 Oct 2020 13:32:47 -0400
From: Don Wilhelm <[hidden email]>
To: [hidden email], [hidden email], [hidden email]
Subject: Re: [Elecraft] [K1]CW Tune Led for Elecraft K2/K1
Message-ID: <[hidden email]>
Content-Type: text/plain; charset=utf-8; format=flowed

Despite what hat website says, there are no kits available. Tom Hammond
was SK several years ago, but his local radio club has preserved the
content on his website.
All the instructions are there, and I believe Tom used FAR Circuits for
his boards. An email to FAR Circuits may turn up a board for you.

73,
Don W3FPR

On 10/15/2020 12:59 PM, Jim H via Elecraft wrote:

Hi,It took awhile to find this site. You will have to dig though it.?http://www.mmccs.com/mmarc/n0ss/I hope this helps,73? ??Jim H??k7sss?In a message dated 10/15/2020 6:10:40 AM Pacific Standard Time, [hidden email] writes:
Hello,?someone out there still have the kit for CE Tune Led modification for the Elecraft K2 (or K1) ?Or any information where is possible to find it ??Thanks a lot, Graziano IW2NOY / W2NOY



______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]
Reply | Threaded
Open this post in threaded view
|

Re: CW Tune Led for Elecraft K2/K1

Elecraft mailing list
In reply to this post by iw2noy
 Ron's (wb3aal) documentation for the CW tuning indicator is on the wayback machine.
https://web.archive.org/web/20180109195848/http://www.wb3aal.com/Pages/K6XX/K6XXCWIndicatorKit.htm

Richard - K4KRW

   
 
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]