Elecraft

CW on ssbHello Everyone,

Classic

List

Threaded

9 messages Options

Gerry leary

CW on ssbHello Everyone,

I am trying to find the place in the menu system where I can turn on the CW while in SSB mode is located. I have heard that it is in the CW features but I find nothing there. Can anyone tell me how to find this? Gerry Leary who hopes that Elecraft implements the rest of the CW read out feature.

Sent from my iPhone this time
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

Elecraft mailing list

Re: CW on ssbHello Everyone,

On the Configuration Menu go to CW WGHT SSB-CW. Tapping the 1 key
toggles between SSB+CW, which allows CW to be sent when in SSB Mode and
SSB-CW, which doesn't. The other station operating SSB will hear your
signal at the tone sent by your sidetone pitch.

73, Charles N2SO

On Tuesday, September 16, 2014 7:43:00 AM, Gerry leary wrote:

>
> I am trying to find the place in the menu system where I can turn on the CW while in SSB mode is located. I have heard that it is in the CW features but I find nothing there. Can anyone tell me how to find this? Gerry Leary who hopes that Elecraft implements the rest of the CW read out feature.
>
> Sent from my iPhone this time
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to [hidden email]
>

pa0pje

Re: CW on ssbHello Everyone,

In reply to this post by Gerry leary

Owner's manual version C4 page 37:

CW WGHT
Adjusts element/space timing ratio (weight) for the internal keyer.
Additional functions of this menu entry, via numeric keypad:
Tap 1 to select S S B - C W (default) or S S B + C W (allows CW in SSB
modes).
When CW-in-SSB is in effect, tapping the KEYER/MIC knob in SSB mode
alternates between keyer speed and mic gain rather than CMP/ALC and SWR/RF
transmit metering. CW transmit in SSB mode is not available if SPLIT is on.
Tap 4 to select V O X N O R (default) or A U T O O F F . The A U T O O F
F setting
turns CW VOX off on power-up, avoiding accidental keying by attached
PCs, etc.
Tap 5 to select automatic VFO offset on SSB/CW mode change (V F O O F S ) or
no offset (V F O N O R , default). Automatic offset is often used on 6
meters, where
mixed-mode QSOs are necessary during fading. Note: Pitch matching will be
more accurate if USB is paired with CW REV, and LSB with CW normal.

Cheers,
Peter

Op 2014-09-16 13:43 schreef Gerry leary:

Gerry leary

Re: CW on ssbHello Everyone,

Hello Peter,

None of these readings are available to me. I am working with Rob Santello who makes the hampod to try to implement them. I can not read the display.

Sent from my iPhone this time

> On Sep 16, 2014, at 6:01 AM, "Peter Eijlander (PA0PJE)" <[hidden email]> wrote:
>
> Owner's manual version C4 page 37:
>
> CW WGHT
> Adjusts element/space timing ratio (weight) for the internal keyer.
> Additional functions of this menu entry, via numeric keypad:
> Tap 1 to select S S B - C W (default) or S S B + C W (allows CW in SSB modes).
> When CW-in-SSB is in effect, tapping the KEYER/MIC knob in SSB mode
> alternates between keyer speed and mic gain rather than CMP/ALC and SWR/RF
> transmit metering. CW transmit in SSB mode is not available if SPLIT is on.
> Tap 4 to select V O X N O R (default) or A U T O O F F . The A U T O O F F setting
> turns CW VOX off on power-up, avoiding accidental keying by attached PCs, etc.
> Tap 5 to select automatic VFO offset on SSB/CW mode change (V F O O F S ) or
> no offset (V F O N O R , default). Automatic offset is often used on 6 meters, where
> mixed-mode QSOs are necessary during fading. Note: Pitch matching will be
> more accurate if USB is paired with CW REV, and LSB with CW normal.
>
> Cheers,
> Peter
>
>
> Op 2014-09-16 13:43 schreef Gerry leary:
>>
>> I am trying to find the place in the menu system where I can turn on the CW while in SSB mode is located. I have heard that it is in the CW features but I find nothing there. Can anyone tell me how to find this? Gerry Leary who hopes that Elecraft implements the rest of the CW read out feature.
>>
>> Sent from my iPhone this time
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:[hidden email]
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>> Message delivered to [hidden email]
>>

Gerry leary

Re: CW on ssbHello Everyone,

In reply to this post by pa0pje

Hello,
I just played again. I did get the Hampod to read the CW-SSB feature. I was not waiting long enough after pressing the button. I was a little to impatient. Thanks for the help. Gerry

Sent from my iPhone this time

pa0pje

Re: CW on ssbHello Everyone,

In reply to this post by Gerry leary

Hello Gerry,

I did not realize you are visually impaired.
Charles N2SO sent a message as well in a shorter form effectively
telling the same thing. Of course it depends also on the firmware
version on your KX3 whether this setting is available or not.

Is there anyone else with a good idea apart from contacting Elecraft
Support?

73,
Peter

Op 2014-09-16 14:05 schreef Gerry leary:
> Rob Santello who makes the hampod
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

Poul Erik Karlshøj (PKA)-2

Re: CW on ssbHello Everyone,

In reply to this post by Elecraft mailing list

Could someone please write a Macro that does that?
73/OZ4UN

> Den 16/09/2014 kl. 13.58 skrev "Charles Tropp via Elecraft" <[hidden email]>:
>
> On the Configuration Menu go to CW WGHT SSB-CW. Tapping the 1 key toggles between SSB+CW, which allows CW to be sent when in SSB Mode and SSB-CW, which doesn't. The other station operating SSB will hear your signal at the tone sent by your sidetone pitch.
>
> 73, Charles N2SO
>
>> On Tuesday, September 16, 2014 7:43:00 AM, Gerry leary wrote:
>>
>> I am trying to find the place in the menu system where I can turn on the CW while in SSB mode is located. I have heard that it is in the CW features but I find nothing there. Can anyone tell me how to find this? Gerry Leary who hopes that Elecraft implements the rest of the CW read out feature.
>>
>> Sent from my iPhone this time
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:[hidden email]
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>> Message delivered to [hidden email]
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to [hidden email]

vk2rq

Re: CW on ssbHello Everyone,

MN012;SWT019;MN255;
(assuming KX3, since the procedure below applies to that radio)

73,
Matt VK2RQ

> On 17 Sep 2014, at 9:41 pm, Poul Erik Karlshøj (PKA) <[hidden email]> wrote:
>
> Could someone please write a Macro that does that?
> 73/OZ4UN
>
>> Den 16/09/2014 kl. 13.58 skrev "Charles Tropp via Elecraft" <[hidden email]>:
>>
>> On the Configuration Menu go to CW WGHT SSB-CW. Tapping the 1 key toggles between SSB+CW, which allows CW to be sent when in SSB Mode and SSB-CW, which doesn't. The other station operating SSB will hear your signal at the tone sent by your sidetone pitch.
>>
>> 73, Charles N2SO
>>
>>> On Tuesday, September 16, 2014 7:43:00 AM, Gerry leary wrote:
>>>
>>> I am trying to find the place in the menu system where I can turn on the CW while in SSB mode is located. I have heard that it is in the CW features but I find nothing there. Can anyone tell me how to find this? Gerry Leary who hopes that Elecraft implements the rest of the CW read out feature.
>>>
>>> Sent from my iPhone this time
>>> ______________________________________________________________
>>> Elecraft mailing list
>>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>>> Help: http://mailman.qth.net/mmfaq.htm
>>> Post: mailto:[hidden email]
>>>
>>> This list hosted by: http://www.qsl.net
>>> Please help support this email list: http://www.qsl.net/donate.html
>>> Message delivered to [hidden email]
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:[hidden email]
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>> Message delivered to [hidden email]
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to [hidden email]

Gerry leary

Re: CW on ssbHello Everyone,

It is the KX3. KS>

Sent from my iPad

On Sep 17, 2014, at 1:11 PM, Matt VK2RQ <[hidden email]> wrote:

MN012;SWT019;MN255;
(assuming KX3, since the procedure below applies to that radio)

73,
Matt VK2RQ

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]