CW sound level

classic Classic list List threaded Threaded
2 messages Options
Reply | Threaded
Open this post in threaded view
|

CW sound level

William E. Twaddell
K2#1837 new to me.

The sound level out of the speaker from the internal keyer is hardly
audible.
This is so even if the rig audio is full. The normal audio from received
signals is fine.
Any suggestions
Tnx
Bill N2DH

_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

Reply | Threaded
Open this post in threaded view
|

RE: CW sound level

Ron D'Eau Claire-2
Bill N2DH wrote:

The sound level out of the speaker from the internal keyer is hardly
audible.
This is so even if the rig audio is full. The normal audio from received
signals is fine.
-----------------------------

Tap MENU, and use the BAND buttons or turn the tuning knob to find
STl(sidetone level). If you don't see it, press/hold DISPLAY to switch to
the PRI menu and you'll find it. When you find it, you'll hear the sidetone.
Turn the tuning knob to adjust the level. The sidetone level is independent
of the AF or RF gain control positions.

Ron AC7AC


_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com