I had previously posted that I needed the correct cable for my amp and Bob
at Array Solutions emailed me and fixed my problem faster than I could bat
an eyelash. Got the right cable and set the amp for "Y" Yeasu and the amp
now tracks the K3. It also has the ALC cable with it and that also does
what I expect. Using the W2 wattmeter protects the amp if I have the wrong
antenna from my remote. Now all that is left is to get the remote situation
and the tuner to do that job. I am looking at both the HC 1.5Kfx auto tuner
and the Palstar At-Auto to figure out what to order next. I am somewhat
afraid of the MFJ-998 as I want a 1.1 to 1 or less and can already to 1.7 to
1 with the antennas I have. I will keep investigating. I am about ready to
pounce unless Elecraft would have something on the horizon.
73,
Bill
K9YEQ
K2 & KX1 (Field tester); K3; W2; mini mods
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.html
Locked
