Slow down and think.
I don’t know what the DRAWS HAT end looks like but the KX3 end(s) are identified in the manual.
The mic/PTT is 3.5 TRRS
Phones is 3.5 TRS
CW KEY is 3.5 TRS
ACC (CAT) is 3.5 TRS
I/Q out is 2.5 TRS
Sent from my iPhone
...nr4c. bill
> On May 21, 2019, at 6:43 PM, sambanks <
[hidden email]> wrote:
>
> I am putting together a portable Elecraft KX3 HF Digital radio station using a Raspberry Pi/NW Digital DRAWS Hat and I need your help with: 1. Determining what plug size/type (3.5mm or 2.5mm/ TRRS or TRRRS or something else) is needed on the cable end that connects to an Elecraft KX3? 2. Where the cable connects to on the Elecraft KX3 (Phone, MIC, RXI/O, or somewhere else)? 3. Determining what plug size/type (3.5mm/ TRRS or TRRRS, DIN-6, or something else) is needed on the cable end that connects to NW Digital DRAWS Hat? 4. Where the cable connects to on the NW DIGITAL DRAWS Hat.Any assistance you provide would be appreciated. 73Sam N5SIBSent from my Verizon, Samsung Galaxy smartphone
> ______________________________________________________________
> Elecraft mailing list
> Home:
http://mailman.qth.net/mailman/listinfo/elecraft> Help:
http://mailman.qth.net/mmfaq.htm> Post: mailto:
[hidden email]
>
> This list hosted by:
http://www.qsl.net> Please help support this email list:
http://www.qsl.net/donate.html______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.html
Locked
