Callsign Software

[Rich McCabe]

For those of you that have RealPlayer installed and a broadband connection
(and have interest)..........

I was did a screen video capture of the Callsign K2 software today. This
version is in BETA and is getting close to release.

The K2 serial interface has been a challenge to say the least and because of
this several areas have special timing profilers built into to slow the
radio commands down to a point where the K2 can keep up.

Currently, the DSP section is undergoing a major workover to speed commands
up. Not a problem with the DSP itself but apparently the K2 auxbus.

You will notice that DSP filter buttons are labeled from querying the DSP.
There is also LC and HC +/- buttons so you can set your upper and lower
filters from the software. The NR has adjustable parameters as well.

Anyway, its a "CRUDE" run through of the radio. Thought I would share with
the group. I am guessing this version will be available in the next two
weeks depending on how timing issues work out.

Here is a link to the video file. As I said it requires RealPlayer and
around a 450K broadband connection.

http://www.callsignsoftware.com/mike.ram

73,
Rich
kd0zv

_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

[N8LP]

My LP-100 Digital Vector RF Wattmeter is officially for sale now.
Pictures of the final production version are on my website under the
LP-100 link. The LP-100 is based on the QEX cover article from Jan/Feb,
with the addition of a cool new vector impedance screen (displays Z, R,
and X from 0-999.9 ohms). Sales for the first production run will be cut
off on March 27 to allow for deliveries before Dayton. I will place an
order for a second run immediately following Dayton. I will have a booth
there, with a limited supply of LP-100s... haven't been assigned a booth
number yet. I will also be showing the LP-200 digital dummy
load/wattmeter kit, LP-300 digital handheld wattmeter kit and a DDS
based panadapter kit, which will also allow display of xmit IM
distortion using an Elecraft 2T-Gen two-tone generator and CP-1 or
similar coupler. You will find links to all these products on my website
at www.telepostinc.com

I will also be displaying some of this stuff at QRP-ARCI vendor's night.

73,
Larry N8LP



_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com