Problem solved. Operator error.
wrong radio. I actually had screen shots for both setups. I guess I changed
> Hi Rob,
>
> As I wrote, I cannot transmit SSB using the Line In. Mic is set to Line
> 21. Yes, I am trying to use LINE IN over the built-in USB soundcard,
> Nothing is connected to the Line In on the back of the radio.
>
> 73, Ken, K6LA
>
> On Thu, Oct 3, 2019 at 1:37 PM Elecraft Support <
[hidden email]>
> wrote:
>
>> Hello Ken,
>>
>> Thank you for contacting Elecraft. Do you have MIC SEL set to LINE IN?
>> Have you checked the LINE level using the SPEED/MIC knob? It looks like
>> you are trying to use LINE IN over the built-in USB soundcard, is that
>> correct? If so, do you have anything connected to the LINE IN jack on the
>> back of the radio?
>>
>> Rob
>> Elecraft Customer Support
>>
[hidden email]
>> 831-763-4211
>>
>>
>> On Thu, Oct 3, 2019 at 1:27 PM Ken Widelitz <
[hidden email]> wrote:
>>
>>> I have KIO3Bs for both of my K3s (plural K3, not K3S.) In getting setup
>>> for the CQP with Writelog, I find I cannot transmit SSB using the Line In
>>> from the KIO3B on both radios. If I plug a mic into the rear mic jack and
>>> change the menu MIC SEL setting to rP.H I am able to transmit SSB.
>>>
>>> I know the mic is working to the computer's internal sound card, as the
>>> sound settings on the computer shows voice input from the mic.
>>>
>>> The KIO3Bs are working as far as reading out the frequency of the
>>> radios, so it is not a cable issue.
>>>
>>> The Writelog Sound application shows the same settings I have always
>>> used:
>>>
>>> Left Radio Rcvr - Microphone (2- USB Audio CODEC)
>>> Xmtr - Speakers (2- USB Audio CODEC) (Allocate
>>> exclusively)
>>>
>>> Right Radio Rcvr - Microphone (USB Audio CODEC)
>>> Xmtr - Speakers (USB Audio CODEC) (Allocate
>>> exclusively)
>>>
>>> Operator Mic - Microphone (Realtech High Definition Audio) (Allocate
>>> exclusively)
>>>
>>> Help please!
>>>
>>> 73, Ken, K6LA / VY2TT
>>>
>>>
>>>
Locked
