Can't interface Dx4win to K3

[Howard K2HK]

On the road

Sent from my iPad

Begin forwarded message:

> From: Howard K2HK <[hidden email]>
> Date: June 2, 2014 at 1:30:27 PM
> Subject:( K3)Can't interface Dx4win to K3
>
 lost control of K3 when using Dx4win 8.05. It had been working w/o problem.
> My setup: Win7 computer, native serial port (com1) , P3, Pigknob, Winkeyer. I am using LP bridge for virtual serial ports. All programs respond as normal, i.e.,keying, kkey macro program, K3 utility. However,  when selecting a spot on DX spots screen I receive the radio time out, interface disabled. So far as I can tell the DX spot screen updates and all other features function normally. I have tried the cable directly to K3 and with another K3 with similar results. I have also changed serial ports. No response from Dx4win reflector so hoping for some help here.

> Howard ..K2HK                        
> ______________________________________________________________
> DX4WIN mailing list
> Home: http://mailman.qth.net/mailman/listinfo/dx4win
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[Howard K2HK]

Bob, Bryan,Thank you for response.
Runs normally until I select a spot which should send the  info to the K3.  I can see updated spots in the spot window. Selecting a spot disables the radio interface. Although it resumes indicating incoming spots. FRUSTRATING. I believe it is independent of the LP Bridge because I have connected a native port #1 straight through to the K3 with same result.Howard [hidden email]

> Date: Fri, 6 Jun 2014 16:32:52 -0400
> From: [hidden email]
> To: [hidden email]
> Subject: Re: [Dx4win] FW: [Elecraft] Can't interface Dx4win to K3
>
> I am using lp bridge and having trouble staying connected to dx4win
> also. I stay connected just fine until i go split operation and then i
> get a time out. Maybe it is the lpt bridge.
>
> Bob
> Bob Papa November
> On 6/6/2014 12:07, Howard K2HK wrote:
> >
> >
> >   From: Howard K2HK <[hidden email]>
> >   Date: June 6, 2014 at 1:30:27 PM
> >   Subject:( K3)Can't interface Dx4win to K3
> >   No response from Dx4win reflector so trying once more.K3 does not change frequency when using Dx4win 8.05. Simply times out when a spot is selected. It had been working w/o problem.
> >   My setup: Win7 computer, native serial port (com1) , P3, Pigknob, Winkeyer. I am using LP bridge for virtual serial ports. All programs respond as normal, i.e.,keying, kkey macro program, K3 utility. However,  when selecting a spot on DX spots screen I receive the radio time out, interface disabled. So far as I can tell the DX spot screen updates and all other features function normally. I have tried the cable directly to K3 and with another K3 with similar results. I have also changed serial ports.
> >   73,
> >   Howard ..K2HK
> >
> >    
> > ______________________________________________________________
> > DX4WIN mailing list
> > Home: http://mailman.qth.net/mailman/listinfo/dx4win
> > Help: http://mailman.qth.net/mmfaq.htm
> > Post: mailto:[hidden email]
> >
> > This list hosted by: http://www.qsl.net
> > Please help support this email list: http://www.qsl.net/donate.html
> >
>
> ______________________________________________________________
> DX4WIN mailing list
> Home: http://mailman.qth.net/mailman/listinfo/dx4win
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html

     
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]