Can't send RTTY in 15M

[Gary Smith-2]

Trying to take part in the RTTY contest using the CW key to send RTTY
and when I am on 15M the key is dead. When I go to other bands all is
fine and the CW key sends RTTY.

Mode on K3 display reads data but entering a call in N1MM, instead of
defaulting to 599 it defaults to 59 so somehow something is telling
the K3 its in SSB though the readout says data. All other bands OK.

Ideas?

73,

Gary
KA1J

 

---
This email is free from viruses and malware because avast! Antivirus protection is active.
http://www.avast.com

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[k5oai]

while on 15m have you set DATA MD to FSK D

On 3/15/2014 3:04 PM, Gary Smith wrote:

> Trying to take part in the RTTY contest using the CW key to send RTTY
> and when I am on 15M the key is dead. When I go to other bands all is
> fine and the CW key sends RTTY.
>
> Mode on K3 display reads data but entering a call in N1MM, instead of
> defaulting to 599 it defaults to 59 so somehow something is telling
> the K3 its in SSB though the readout says data. All other bands OK.
>
> Ideas?
>
> 73,
>
> Gary
> KA1J

--
GB & 73
K5OAI
Sam Morgan
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Gary Smith-2]

Found it but unknown why. The data md was set for AFSK A but that's
odd because I never use that setting, only FSK D. Unknown why it
changed that without me telling it to do so but that was the problem
& solution.

sorry for the bandwidth.

73,

Gary
KA1J

> Trying to take part in the RTTY contest using the CW key to send RTTY
> and when I am on 15M the key is dead. When I go to other bands all is
> fine and the CW key sends RTTY.
>
> Mode on K3 display reads data but entering a call in N1MM, instead of
> defaulting to 599 it defaults to 59 so somehow something is telling
> the K3 its in SSB though the readout says data. All other bands OK.
>
> Ideas?
>
> 73,
>
> Gary
> KA1J
>
>  
>
> ---
> This email is free from viruses and malware because avast! Antivirus protection is active.
> http://www.avast.com
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>

---
This email is free from viruses and malware because avast! Antivirus protection is active.
http://www.avast.com

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html