Can the K3 toggle between two power levels?

[VE3WDM]

Good evening, I was in the CQ WW CW contest this weekend and was operating at 500mW's or QRPp level. There were times I had to pump the power up to 5 watts to make the contact, then bring the level back down to 500mW's. Is there a macro or other way to toggle the rig back and forth between the two (or more but don't want to get greedy) power levels?
Mike
VE3WDM
http://ve3wdm.blogspot.com
     
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Nate Bargmann]

* On 2011 28 Nov 17:50 -0600, Mike Weir wrote:
>
> Good evening, I was in the CQ WW CW contest this weekend and was operating at 500mW's or QRPp level. There were times I had to pump the power up to 5 watts to make the contact, then bring the level back down to 500mW's. Is there a macro or other way to toggle the rig back and forth between the two (or more but don't want to get greedy) power levels?

I have macros programmed to PF1 and PF2 for 5W and 100W respectively.
It's as easy as setting Macro 1 to 'PC005;' and Macro 2 to 'PC100;' with
the K3 utility.

73, de Nate N0NB >>

--

"The optimist proclaims that we live in the best of all
possible worlds.  The pessimist fears this is true."

Ham radio, Linux, bikes, and more: http://www.n0nb.us
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html