Joel -
Keep in mind the fact that the required width would include spacing for
the various mini- plugs that connect the PX3, the KX3, the 12 VDC, the key
(if you use one other than the built-in) and the headset. Add to that the
fact that the plugs need additional space between the units to be removed
from the jacks, and maybe a bit more to get your fingers on them. Don’t
ask me at what cost I became aware of these details . . . or what happens
after passing 70.
Ted, KN1CBR
>>
>> I have in my mind exactly what I want to do by cutting the 2x4 scraps
>>into 1/2? thick strips and joining them into a plank with my biscuit
>>joiner. I would like to build a stand that will hold both the KX3 and
>>the PX3 (don?t have one yet but I may buy one) and I need to confirm the
>>total width is 13 1/2?. I think I added up 13.3? but my measuring stick
>>does 32nds not 10ths. :) If it turns out okay, I?ll provide pictures.
>>
>> Is this what happens when you approach 50? You start waning anecdotally?
>>
>> Thanks for the bandwidth.
>>
>> 73,
>> Joel - W4JBB
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.htmlMessage delivered to
[hidden email]
Locked
