Comm does not work after KIO3B installation

[Adde Tjernberg]

Hi all!

I recently installed the KIO3B (the USB module) upgrade in my K3.

The K3 recognize the KIO3B board and I am able to choose "USb" under the
CONFIG->RS232 menu settings.

However, when connecting the K3 to my computer, the computer does not "see"
the radio. Nothing happens more than the computer says it does not
recognize the device.

The "old style" RS232 communication does not work either.

Before installing the KIO3B module I upgraded to latest fw (5.57).

Any ideas why it does not work?

73 de Adde, SM0SHG
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[Don Wilhelm]

Adde,

If you get any message at all on the computer, then the computer knows
that "some" device is connected.
If that is the case, you may need to load the driver manually - download
from the Elecraft website.
It is an FTDI USB to serial converter, and Windows 10 normally loads the
driver properly.  I don't know about other versions or non-Windows OS.

73,
Don W3FPR

On 4/17/2017 4:11 PM, Adde Tjernberg wrote:

> Hi all!
>
> I recently installed the KIO3B (the USB module) upgrade in my K3.
>
> The K3 recognize the KIO3B board and I am able to choose "USb" under the
> CONFIG->RS232 menu settings.
>
> However, when connecting the K3 to my computer, the computer does not "see"
> the radio. Nothing happens more than the computer says it does not
> recognize the device.

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]