Randy,
Connection diagram for any transceiver with MK II and PW-1 is available
from the application note "Using the PW-1 safely (and with non-Icom
transceivers) <
http://microham-usa.com/store/cmspage.php?page_id=27>
on the support page at www.microHAM-USA.com/support.html.
You will probably want to connect ALC from the PW-1 to K3 but set
it slightly above normal drive levels as the PW-1 uses ALC to protect
itself in event of problems.
73,
... Joe, W4TV
On 1/13/2014 4:19 PM, Randy wrote:
> I am thinking of connecting a PW-1 to my K3. I would like to the K3 to
> send band data to the PW-1 and have the PW-1 following the K3 just as if
> the K3 was a Icom transceiver.
>
> I am thinking of connecting the CI-V port on the back of my MicroHam
> MKII to the K3. What I'm a little uncertain about is the ALC set up. Is
> there any problem with this arrangement?
>
> Randy, AA8R
> ______________________________________________________________
> Elecraft mailing list
> Home:
http://mailman.qth.net/mailman/listinfo/elecraft> Help:
http://mailman.qth.net/mmfaq.htm> Post: mailto:
[hidden email]
>
> This list hosted by:
http://www.qsl.net> Please help support this email list:
http://www.qsl.net/donate.html>
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.html
Locked
