Control Board R18 and R19

[Arie Lukkassen]

Need some clarification:

I'm building the K2 and currently at the control board
 (page 17) and need to install R18 & R19 but can not
fully understand if I also need to make short
(jumpers) above those resistors at the top side of the
board. What is the purpose of those shorts . I guess I
understand wrong or there must be a cerain reason.

Thanks for all the help.

New HAM from Tokyo.

Arie



__________________________________________________
Do You Yahoo!?
Tired of spam?  Yahoo! Mail has the best spam protection around
http://mail.yahoo.com 
_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

[Don Wilhelm-3]

Arie,

First, welcome and congratulations on becoming a new ham.

If you look at the value of R18 and R19 (on the schematic), you will find
they are zero ohms - in other words, the jumpers are the 'resistors' - you
will find no zero ohm resistors in the kit parts, simply use jumper wires.

Note that these 'resistor' jumpers will be removed if you add either the
KAF2 or the KDSP2, so consider carefully the mounting of these jumpers and
mount them on whichever side will allow the easiest removal for you.

73,
Don W3FPR

> -----Original Message-----
>
> Need some clarification:
>
> I'm building the K2 and currently at the control board
>  (page 17) and need to install R18 & R19 but can not
> fully understand if I also need to make short
> (jumpers) above those resistors at the top side of the
> board. What is the purpose of those shorts . I guess I
> understand wrong or there must be a cerain reason.
>
> Thanks for all the help.
>
> New HAM from Tokyo.
>
> Arie
>
>

_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com