He everyone,
this is a kind of an additional feature request regarding K3 and K3/0 mini firmware. Due to the fact the K-Pod can control the K3(s) over the production interface and the K3 can be controlled by an K3/0 mini over the UART Interface. An idea came up for improved SO2V operation if an K3/0 mini is available like in my case.
If an crossed cable between production interface of K3/0 and K3(s) is used to interface the K3(s) by an K3/0 mini and the FW enables the possibility to use all "BSET" features on the K3/0 including displaying frequencies of Sub-Rx I can imagine this will improve SO2V operation dramatically. So Idea is Main Receiver and TX settings on K3 on left side of the table and K3/0 mini on the right side of the table and controlling Sub-Rx including filter etc.
Just an idea which I had in mind for several days.
Best regards,
Olli, DH2WQ
--
------------------------------------------------------------------------
Oliver Grossmann | DH2WQ |
[hidden email]
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.htmlMessage delivered to
[hidden email]
Locked
