Copying CW at high speeds

[Mike VE3YF]

Hi:

Has anyone tried using one of the CNC Weighted Tuning Knobs on their
KPod. I rarely use the Main VFO on my K3S and thinking of moving the
aftermarket CNC knob to the Kpod. Good or bad would like to hear your
experience or recommendations.

--

*73 De Mike*
*VE3YF

_/http://www.ve3yf.com/_*

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[N7US]

I bought a set of the original, weighted knobs with the metal insert and
dimple in ball bearings on the larger knob.

i used them on my K3 but moved the larger knob to my K-Pod when I got my
K3S.  I am not using the smaller one now.

I like the knob on the K-Pod a lot.  I use the K-Pod more than the knobs on
the radio, and it allows me to use the larger, weighted knob for both VFOs
and RIT.

Jim N7US

On Sun, Jan 26, 2020 at 3:39 PM Mike VE3YF <[hidden email]> wrote:

> Hi:
>
> Has anyone tried using one of the CNC Weighted Tuning Knobs on their
> KPod. I rarely use the Main VFO on my K3S and thinking of moving the
> aftermarket CNC knob to the Kpod. Good or bad would like to hear your
> experience or recommendations.
>
> --
>
> *73 De Mike*
> *VE3YF
>
> --

Jim N7US Sent from Gmail Mobile
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[ke9uw]

What's the history of the bearings on the encoders with use of the weighted knob? Just curious...maybe I'll get one for the pod...

Jack BMW Motorcycles
Chuck KE9UW
[hidden email]

Sent from my iPad

> On Jan 27, 2020, at 4:11 AM, Jim McDonald <[hidden email]> wrote:
>
> I bought a set of the original, weighted knobs with the metal insert and
> dimple in ball bearings on the larger knob.
>
> i used them on my K3 but moved the larger knob to my K-Pod when I got my
> K3S.  I am not using the smaller one now.
>
> I like the knob on the K-Pod a lot.  I use the K-Pod more than the knobs on
> the radio, and it allows me to use the larger, weighted knob for both VFOs
> and RIT.
>
> Jim N7US
>
>> On Sun, Jan 26, 2020 at 3:39 PM Mike VE3YF <[hidden email]> wrote:
>>
>> Hi:
>>
>> Has anyone tried using one of the CNC Weighted Tuning Knobs on their
>> KPod. I rarely use the Main VFO on my K3S and thinking of moving the
>> aftermarket CNC knob to the Kpod. Good or bad would like to hear your
>> experience or recommendations.
>>
>> --
>>
>> *73 De Mike*
>> *VE3YF
>>
>> --
> Jim N7US Sent from Gmail Mobile
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to [hidden email]

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]