Cross band work in split operation

[W7GJ, Lance]

I think I have seen this somewhere before, but I wanted to make sure... I would like
to be able to listen on 10m to a receive converter while transmitting on 6m. But
this does not seem to work with my split A/B VFO's. Is there a trick to making this
work, or is the split operation only possible in the same band? I currently only
have the one receiver built into my K3, but in this case I am only interested in
listening on one band in one VFO...MNI TNX and VY 73, Lance
--
Lance Collister, W7GJ (ex: WN3GPL, WA3GPL, WA1JXN, WA1JXN/C6A, ZF2OC/ZF8)
P.O. Box 73
Frenchtown, MT 59834 USA
QTH: DN27UB
TEL: [phone]
URL: http://www.bigskyspaces.com/w7gj
2m DXCC #11/6m DXCC #815


_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

[KK7P]

Crossband setting of the VFOs is not yet available. It is very high on
the list of firmware task priorities.

73,

Lyle KK7P
_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

[W7GJ, Lance]

Lyle Johnson wrote:
> Crossband setting of the VFOs is not yet available. It is very high on
> the list of firmware task priorities.
>
> 73,
>
> Lyle KK7P
>
TNX Lyle = that is GREAT to hear! I look forward to the firmware release with it!
GL and VY 73, Lance

--
Lance Collister, W7GJ (ex: WN3GPL, WA3GPL, WA1JXN, WA1JXN/C6A, ZF2OC/ZF8)
P.O. Box 73
Frenchtown, MT 59834 USA
QTH: DN27UB
TEL: [phone] URL: http://www.bigskyspaces.com/w7gj
2m DXCC #11, 6m DXCC #815


_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com