G4LNA wrote:
> Working AM on VFO A and setting up VFO B to receive SSB then operating
> the
> split it tells me SPT N/A.
Hi Paul,
I'm sorry to report that only a few modes are presently allowed for
cross-mode split (CW/SSB, LSB/USB, CW/CW REV). Our goal is to add other
modes back in if there's enough interest. Each requires considerable
firmware modification and re-testing.
Is AM/SSB a common split?
Note that you can achieve this without using SPLIT if you have the
sub-receiver installed. For example, you could transmit/receive in SSB
mode on VFO A on one frequency, and receive AM on the sub on a
different frequency. If you want to hear only AM signals, adjust the
main and sub volume levels accordingly.
73,
Wayne
N6KR
---
http://www.elecraft.com______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.html