Cw decode text, again

[dennis rosenbalm]

Apparently there currently is no way to decode cw text sent from the KEY line on either the K3 or the KX3 vfo B display.. It seems likely lots of folks are using external keyers with these radios, keyers that do connect to the KEY line input. I wonder if this could be added as a feature for a future software upgrade?


______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[pa0pje]

I don't. I always use the internal keyer of my K2 and KX3.
Only on the KX3 I use a straight key connected to the front connection
that is normally used to connect the KXPD3 paddle, in order to be able
to use both a paddle and a straight key without switching or replugging.

If you happen to have an Android smartphone, download the free Morse
Code Reader (with the Walrus icon...) to decode any CW coming from a
speaker. Works quite well.

Cheers,
Peter - PA0PJE

Op 2015-02-03 23:17 schreef GDR:
> It seems likely lots of folks are using external keyers with these radios, keyers that do connect to the KEY line input.
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]