D13 voltage test high?

[TI2/NA7U]

Manual says D13 (banded end) should show between 90-150V, mine measures 178V

... says U4 pin 8 should be between -5 to -25 V, mine measures -30V

Still going through the receiver tests, up to the dual-supply tests and all
seems well, so should I be concerned about those readings?

73,

TI2/NA7U



-----
Cloud Warmer Ham Radio Blog
--
Sent from: http://elecraft.365791.n2.nabble.com/
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Don Wilhelm]

What is the value of R4?  It should be 100k.

73,
Don W3FPR

On 4/9/2019 4:54 PM, TI2/NA7U wrote:
> Manual says D13 (banded end) should show between 90-150V, mine measures 178V
>
> ... says U4 pin 8 should be between -5 to -25 V, mine measures -30V
>
> Still going through the receiver tests, up to the dual-supply tests and all
> seems well, so should I be concerned about those readings?
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html