DATA A not available on 20 & 15 PSK31

[John McBride-2]

Thanks for the responses which have been received. When following the directions to set DATA A on  20 and 15 meters, I do a 1/2 second hold on AFX - DATA MD and N/A is displayed. When adjusting the VFO B the display then is the same as the quick tap on the AFX - DATA MD, that is date, time, etc. Do you have any thoughts as to why this is not working (because it does work for 40 meters)?

John McBride N0UQC
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[Nr4c]

It takes more than a 1/2 sec hold. A full 1-2 sec works better.

You’re getting the error of trying to go DPLIT when one ZvFO is not on sane Data mode.   Do the double-tap on A>B.

Sent from my iPhone
...nr4c. bill

> On Jun 28, 2020, at 8:31 AM, John McBride <[hidden email]> wrote:
>
> Thanks for the responses which have been received. When following the directions to set DATA A on  20 and 15 meters, I do a 1/2 second hold on AFX - DATA MD and N/A is displayed. When adjusting the VFO B the display then is the same as the quick tap on the AFX - DATA MD, that is date, time, etc. Do you have any thoughts as to why this is not working (because it does work for 40 meters)?
>
> John McBride N0UQC
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to [hidden email]

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[John McBride-2]

Thanks! the A/B switch was the answer. Knew it had to be a simple fix but needed someone to give me the answer.

John N0UQC
________________________________
From: Nr4c <[hidden email]>
Sent: Sunday, June 28, 2020 6:48 AM
To: John McBride <[hidden email]>
Cc: [hidden email] <[hidden email]>
Subject: Re: [Elecraft] DATA A not available on 20 & 15 PSK31

It takes more than a 1/2 sec hold. A full 1-2 sec works better.

You’re getting the error of trying to go DPLIT when one ZvFO is not on sane Data mode.   Do the double-tap on A>B.

Sent from my iPhone
...nr4c. bill

> On Jun 28, 2020, at 8:31 AM, John McBride <[hidden email]> wrote:
>
> Thanks for the responses which have been received. When following the directions to set DATA A on  20 and 15 meters, I do a 1/2 second hold on AFX - DATA MD and N/A is displayed. When adjusting the VFO B the display then is the same as the quick tap on the AFX - DATA MD, that is date, time, etc. Do you have any thoughts as to why this is not working (because it does work for 40 meters)?
>
> John McBride N0UQC
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to [hidden email]

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]