The information is in the manual.
Page 18:
> DIGOUT0 (See Transverter Control)
Page 19 (Transverter Control):
> With KIO3 set to TRN or HF-TRN, the DIGOUT0 line (ACC, pin 6)
> will output 0 V when low power mode is selected for the current
> transverter band (CONFIG:XVn PWR). At all other times, DIGOUT0
> will be floating (Hi-Z).
With a pull-up resistor to +5 or +12V, DIGOUT0 will normally be
high and will go low ("ground") when a transverter band is selected.
73,
... Joe, W4TV
On 7/29/2010 1:03 PM, Richard Dowling wrote:
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.html