DVR audio

[rcbenedict1545]

When I play a recorded message audio transmitted is ok , confirmed by listeners and monitoring remote SDR.
What I hear in my earphones with monitor turned on is distorted.  
Ray
W8LYJ

Sent from my iPad
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Bob Wilson, N6TV]

Check CONFIG:TX MON, to see if it is set to NOR or FAST (FAST should have
no "distortion", because you hear unprocessed MIC audio, with no delay).
This applies to both your own MIC audio and KDVR3 recordings.

Check also CONFIG:TX DVR.  Is it set to NOR or IND?  If IND, there are two
different monitor levels, one monitor level for your own voice spoken live
into the MIC, and a second level that adjusts the DVR message monitor level
(Voice Memories).  Perhaps the latter is set too high?

With CONFIG:TX DVR set to IND, You have to hold down the MON knob a second
time to alternate between adjusting DVR MON level and the MIC MON level.

If that's not it, check if adjusting the CMP level during playback makes
any difference.  Is it also possible that RF is getting into your
headphones?  Does it go away when you use a dummy load?

73,
Bob, N6TV

On Sun, Mar 3, 2019 at 10:32 AM Gmail <[hidden email]> wrote:

> When I play a recorded message audio transmitted is ok , confirmed by
> listeners and monitoring remote SDR.
> What I hear in my earphones with monitor turned on is distorted.
> Ray
> W8LYJ
>
> Sent from my iPad
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[NK7Z]

Does FAST also remove the light delay in the audio?

73s and thanks,
Dave (NK7Z)
https://www.nk7z.net
Award Manager, 30MDG Grid Awards
ARRL Technical Specialist
ARRL Volunteer Examiner
ARRL OOC for Oregon

On 3/3/19 7:01 PM, Bob Wilson, N6TV wrote:
> Check CONFIG:TX MON, to see if it is set to NOR or FAST (FAST should have
> no "distortion", because you hear unprocessed MIC audio, with no delay).
> This applies to both your own MIC audio and KDVR3 recordings.
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Bob Wilson, N6TV]

On Mon, Mar 4, 2019, 6:22 AM Dave Cole (NK7Z) <[hidden email]> wrote:

> Does FAST also remove the light delay in the audio?
>

Yes.  However, with FAST enabled, you cannot hear what the speech
compressor is doing.  Everything you hear while transmitting is
"unprocessed."

73,
Bob, N6TV
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html