DX Doubler not TX on K3

[Jorge Diez - CX6VM-2]

Hello

 

After some years I wanted to connect DX Doubler again and have some problems
because I cannot transmit SSB or CW

 

I have both radios (K3) connected to two USB ports to CAT control (RS232),
is working fine

 

I have PIEXX for DXD connected to other USB

 

DXD seems to work fine, change audio and TX lights from between radio 1 and
2

 

BUT I cannot transmit on the K3!

 

Footswitch is OK, put radios on TX but didn´t transmit no RF

 

VOX on and I cannot send SSB in the mic or CW with the paddles connected in
the back of DXD

 

Any suggestions?

 

73,

Jorge

CX6VM/CW5W

 



---
El software de antivirus Avast ha analizado este correo electrónico en busca de virus.
https://www.avast.com/antivirus
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]