DXE NCC-2 & K3/K3s

[Gary Smith-2]

Does anyone have the DXE NCC-2 connected
to their K3/K3s? I have a question as to
how you have it set up.

Thanks & 73,

Gary
KA1J
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[Dale Boresz]

Hello Gary,

I don't have an NCC-2, however I've been using it's predecessor, the DXE
NCC-1 (very effective product) with my K3 for about 6 years. I'd be glad to
share my experience with the NCC-1 / K3 combination.

73,

Dale - WA8SRA


On Fri, Nov 24, 2017 at 6:46 PM, Gary Smith <[hidden email]> wrote:

> Does anyone have the DXE NCC-2 connected
> to their K3/K3s? I have a question as to
> how you have it set up.
>
> Thanks & 73,
>
> Gary
> KA1J
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to [hidden email]
>

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[Ignacy]

I have one input redirected from RX-OUT and the other one fed by a switch
from KD9SV front saver. My two goals were:
1. Canceling powerline noise.
2. Trying and perhaps phasing multiple receive antennas. I have Hi-Z
triangular connected to RX-IN.

Not more happy than with MFJ-1026 although I may not have tried hard enough.

Given its price, NCC-3 should have:
1. protection to eliminate damage in output if miswired. To avoid trip back
to factory.
2. built-in preamps and overload protectors for inputs A and B. No extra
cost items. Without, sensitivity with receive or sensing antennas poor
especially that NCC2 adds some 10db loss.
3. switch for multiple antennas.
4. smaller.

Ignacy, NO9E




Ignacy, NO9E





--
Sent from: http://elecraft.365791.n2.nabble.com/
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]