Data A mode question for KX3

[WM3M]

In data mode A for the KX3, does it turn mic bias off?
Menu says its on but wanted to check for sure.
Thanks 73
Emory  WM3M
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Stephen Selberg]

Good morning,

I believe it leaves it the mic bias on but turns off the compression. If
your using a signalink USB, you need to have the mic bias off UNLESS you
are using their prefab jumper board. If you're using their board, you can
leave mic bias on. If you're using wire jumpers, it needs to be off. Hope
that helps.

73,

Steve KS6PD

On Saturday, June 1, 2013, WM3M wrote:

> In data mode A for the KX3, does it turn mic bias off?
> Menu says its on but wanted to check for sure.
> Thanks 73
> Emory  WM3M
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email] <javascript:;>
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html