'Crafters,
i have a 7 year old K3 #28xx causing me a headache. I built this (and
other K3s) myself and modified it quite often, so am fairly familiar
with it's innards.
The issue is a dead RX ( no signals on any band, just noise from spkr)
and no power out on any band ( display shows 0.0 Watts) after - say 30
minutes - of just running in rx . When i hit the case with my hand -
like a slap - rx comes back to life and power out works again. I suspect
something has come loose causing a slack joint. Something that is
involved in RX AND TX.
So where should i check? Probably the synth boards?
Thanks.
--
Ohne CW ist es nur CB..
73, Martin DM4iM
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.htmlMessage delivered to
[hidden email]