Hello,
After successfully working VP6D FT8 F/H on two bands, I shut down the station for a few days and when I powered everything back up, I don't have any transmit tones on FT8. The rig goes into transmit but there is no RF output. I also tried other digital modes that have worked previously (Digipan and FLdigi) with no luck. I checked my mechanical connections, cables and K3 settings (LINE=35, MIC SEL=LINE IN) and all seems OK. I'm using WSJT-X version 1.9.1. My fundamental question is where to start on debugging a LINE IN problem? I should mention that the rig interface is a microHAM microKEYER (worked Z23MD on FSK so that part works).
Suggestions?
73, Monty W3SB at ptd.net
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.htmlMessage delivered to
[hidden email]
Locked
