It would make it soooooooo much easier on us when troubleshooting a power distribution issue if we could verify whether the voltage regulator itself or the load is the problem. All you would have to do is put a tiny jumper on the output of the regulator. Then we could snip it and see if the regulator is still putting out proper voltage and also look towards the circuit for a short. An insignificant cost that would make it unnecessary to have to cut a land on the board.
Wayne, Old Buddy, what say ?
Rick K2XT
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.htmlMessage delivered to
[hidden email]
Locked
