Did calibration

[rlindzen]

The power issue was solved with a calibration.  Any suggestions for the inability in link vfo's?
73, Dick, WO1I K3 911
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[markmusick]

With the firmware upgrade the VFO linking was moved from the sub receiver
button to the config menu.
Look in the firmware upgrade notes. There you will find the information you
need to link the VFOs.

Mark Musick, WB9CIF

-----Original Message-----
From: Elecraft [mailto:[hidden email]] On Behalf Of Dick
Lindzen
Sent: Sunday, July 17, 2016 5:19 AM
To: Reflector Elecraft <[hidden email]>
Subject: [Elecraft] Did calibration

The power issue was solved with a calibration.  Any suggestions for the
inability in link vfo's?
73, Dick, WO1I K3 911
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html Message
delivered to [hidden email]

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[rlindzen]

Thanks.

-----Original Message-----
From: Mark E. Musick [mailto:[hidden email]]
Sent: Sunday, July 17, 2016 5:58 AM
To: Dick Lindzen; 'Reflector Elecraft'
Subject: RE: [Elecraft] Did calibration

With the firmware upgrade the VFO linking was moved from the sub receiver button to the config menu.
Look in the firmware upgrade notes. There you will find the information you need to link the VFOs.

Mark Musick, WB9CIF

-----Original Message-----
From: Elecraft [mailto:[hidden email]] On Behalf Of Dick Lindzen
Sent: Sunday, July 17, 2016 5:19 AM
To: Reflector Elecraft <[hidden email]>
Subject: [Elecraft] Did calibration

The power issue was solved with a calibration.  Any suggestions for the inability in link vfo's?
73, Dick, WO1I K3 911
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html Message delivered to [hidden email]

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]