Digikeyer Connection to K3

[Brian Short-3]

I own a Digikeyer and acquired a second for the K3, used.

Having trouble with the install.  Win7 recognized the device,
but only the USB Hub and Digikeyer devices.  The Codecs
are not recognized, specifically.

I checked the jumpers to ensure RS-232 for the serial ports
and that part works.

My original Digikeyer when plugged in causes drivers for
all devices to load.

The used one only finds the USB Hub and Microham Digikeyer
(no CODECs nor 2 other drivers).

Is it something I am doing?
--
http://www.qrz.com/db/k7on



______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[Joe Subich, W4TV-4]

The proper venue for individual microHAM support is "[hidden email]"

 > The used one only finds the USB Hub and Microham Digikeyer
 > (no CODECs nor 2 other drivers).

There are only three USB devices in the original microHAM Digikeyer:
one sound device - USB Audio CODEC, "Generic USB Hub" and "microHAM
USB Device".  If you see "Generic USB Hub" and "microHAM USB Device"
appear/disappear in Windows Device Manager as you connect/disconnect
the USB cable the only issue is Windows recognition of the CODEC.

Check for any '?' devices.

Configure Device Manager to show hidden/disconnected devices,

Disconnect any microHAM devices,

uninstall any hidden/disconnected (gray) USB Audio CODEC, Generic
USB Hub, and microHAM USB Devices and '?' devices that appear in
Device Manager.

Reboot (cold) or Restart Windows

Reconnect the microHAM devices and Windows should install the
necessary drivers.

73,

    ... Joe, W4TV


On 2014-10-18 9:57 AM, Brian Short wrote:

> I own a Digikeyer and acquired a second for the K3, used.
>
> Having trouble with the install.  Win7 recognized the device,
> but only the USB Hub and Digikeyer devices.  The Codecs
> are not recognized, specifically.
>
> I checked the jumpers to ensure RS-232 for the serial ports
> and that part works.
>
> My original Digikeyer when plugged in causes drivers for
> all devices to load.
>
> The used one only finds the USB Hub and Microham Digikeyer
> (no CODECs nor 2 other drivers).
>
> Is it something I am doing?
> --
> http://www.qrz.com/db/k7on
>
>
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to [hidden email]
>

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]