> Check the DigiKeyer II documentation and set it for Line Level output
> rather than Mic Level (which I recall is the default).
Incorrect *again* when you talk about equipment you do not own/use.
microHAM interfaces are capable of producing up to 4V P-P depending
on the setting of the Windows Volume Mixer for the microHAM Audio
Device, the setting for the specific application, and the Master
(Speaker or Headset Earphone depending on device) level.
73,
... Joe, W4TV
On 2015-07-30 11:48 PM, Don Wilhelm wrote:
> Mark,
>
> Increase the output level of the computer soundcard.
>
> How do you have your soundcard Line Out connected? It should connect to
> the K3 Line IN jack.
> Check the DigiKeyer II documentation and set it for Line Level output
> rather than Mic Level (which I recall is the default).
>
> 73,
> Don W3FPR
>
> On 7/30/2015 11:38 PM,
[hidden email] wrote:
>> I have a DigiKeyer II and it is currently connected to my K3. I am
>> using FLDigi software and have no problem whatsoever in copying PSK31.
>> But when I hit the transmit key I am not getting any ALC bars to show
>> on the K3. I turn the Mic control even up to 60 and still no ALC bars.
>> I don't understand what I am doing wrong. Help!! Mark Griffin, KB3Z
>>
>
> ______________________________________________________________
> Elecraft mailing list
> Home:
http://mailman.qth.net/mailman/listinfo/elecraft> Help:
http://mailman.qth.net/mmfaq.htm> Post: mailto:
[hidden email]
>
> This list hosted by:
http://www.qsl.net> Please help support this email list:
http://www.qsl.net/donate.html> Message delivered to
[hidden email]
>
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.htmlMessage delivered to
[hidden email]
Locked
