Digital mode advice

[Pawlak, Daniel L]

Hi,
                I have a K2 (ser no in the 3000s) and would like to set it up to operate with the digital modes. I followed the thread about getting started with JT65 software and will probably try that. My question: is there some guidance available to help me set up my K2 for digital modes. Many moons ago I hooked it up to my old PC and was able to receive digital transmissions, using one of the common programs at the time; but, I did not transmit. Is there an interface box I could buy or build (kit?) to get my on the air?
Thanks.

73, Dan KF4KKF
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[Don Wilhelm]

Dan,

Take a look at the interface box I built for my K2 long ago.  It is on
my webpage www.w3fpr.com.
I still use it on occasion.

73,
Don W3FPR

On 5/31/2017 7:29 AM, Pawlak, Daniel L wrote:
> Hi,
>                  I have a K2 (ser no in the 3000s) and would like to set it up to operate with the digital modes. I followed the thread about getting started with JT65 software and will probably try that. My question: is there some guidance available to help me set up my K2 for digital modes. Many moons ago I hooked it up to my old PC and was able to receive digital transmissions, using one of the common programs at the time; but, I did not transmit. Is there an interface box I could buy or build (kit?) to get my on the air?
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[Pawlak, Daniel L]

Thanks, Don. I will take a look at it. Any recommendations for
commercial products?

-----Original Message-----
From: Don Wilhelm [mailto:[hidden email]]
Sent: Wednesday, May 31, 2017 8:32 AM
To: Pawlak, Daniel L; '[hidden email]'
Subject: EXTERNAL: Re: [Elecraft] Digital mode advice

Dan,

Take a look at the interface box I built for my K2 long ago.  It is on
my webpage www.w3fpr.com.
I still use it on occasion.

73,
Don W3FPR

On 5/31/2017 7:29 AM, Pawlak, Daniel L wrote:
> Hi,
>                  I have a K2 (ser no in the 3000s) and would like to
set it up to operate with the digital modes. I followed the thread about
getting started with JT65 software and will probably try that. My
question: is there some guidance available to help me set up my K2 for
digital modes. Many moons ago I hooked it up to my old PC and was able
to receive digital transmissions, using one of the common programs at
the time; but, I did not transmit. Is there an interface box I could buy
or build (kit?) to get my on the air?



______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]