Distortion on 80m

classic Classic list List threaded Threaded
1 message Options
Reply | Threaded
Open this post in threaded view
|

Distortion on 80m

Malcolm Taylor
Just completed K2 and everything tested okay. Power okay, did the receive
alignment with sig. gen and that was okay. Other bands seem good but on
80m the audio is distorted. CW sounds like a buzzer and SSB is distorted
(always carrier present). BFO reading is fine. Band is lively. Checked cap
values on the 80m bandpass and low pass. Looked for solder joints on L3,
L4, L16, L17. Checked filter settings. Any suggestions very welcome.

Thanks

Malcolm, K1VZ
_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft   
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com