Diversity Receive setup??

[David H Weiss]

Hi All:

I have a BOG loop setup with 30 Feet per side of 50 OHM RG213 (4 Sided)
into a 2 to 5 transformer. I have fed this signal into my K3 with KRX3 set
to ANT=BNC and ANT1 RX PRE indications on the front Panel and DIVERSITY
RECEIVE as well. I have selected a Broadcast Radio station WOR 710 ( About
100 Miles from my QTH)* and I hear it clearly in my left ear.*  My
understanding is that with Diversity receive engaged I should hear the sub
receiver in my right ear; I do not. The AF control for the main receiver
adjusts audio, the SUB receiver AF control has no effect, and I just hear
static.  I have connected the MAIN antenna to ANT 1 with no difference.
The selections of the RX ant button change nothing.

What am I doing wrong? Help would be appreciated..

73

--
Dave  K3FT
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[donovanf]

Dave,


Go to CONFIG and check your L-MIX-R settings


73
Frank
W3LPL

----- Original Message -----

From: "Dave Weiss" <[hidden email]>
To: [hidden email]
Sent: Saturday, June 29, 2019 5:52:43 PM
Subject: [Elecraft] Diversity Receive setup??

Hi All:

I have a BOG loop setup with 30 Feet per side of 50 OHM RG213 (4 Sided)
into a 2 to 5 transformer. I have fed this signal into my K3 with KRX3 set
to ANT=BNC and ANT1 RX PRE indications on the front Panel and DIVERSITY
RECEIVE as well. I have selected a Broadcast Radio station WOR 710 ( About
100 Miles from my QTH)* and I hear it clearly in my left ear.* My
understanding is that with Diversity receive engaged I should hear the sub
receiver in my right ear; I do not. The AF control for the main receiver
adjusts audio, the SUB receiver AF control has no effect, and I just hear
static. I have connected the MAIN antenna to ANT 1 with no difference.
The selections of the RX ant button change nothing.

What am I doing wrong? Help would be appreciated..

73

--
Dave K3FT
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft 
Help: http://mailman.qth.net/mmfaq.htm 
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net 
Please help support this email list: http://www.qsl.net/donate.html 
Message delivered to [hidden email]

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]