Yes, the configuration save includes all the tuning parameters.
There is a serial port command and the KAT500 Utility uses that to erase
memories. See KAT500 Utility, Configuration, "Erase Antenna Tuner
Memories". You can erase tuning solutions stored by band for each of the 3
antenna connectors.
73 de Dick, K6KR
-----Original Message-----
From: Elecraft [mailto:
[hidden email]] On Behalf Of Jerry
Sent: Friday, April 7, 2017 07:20
To: Elecraft Reflector <
[hidden email]>
Subject: [Elecraft] Does the KAT500 Save the tune scheme
GM All,
I have just spent some time "teaching" my KAT500 to remember the tuning
parameter for my antenna. My questions is; when I do a save configuration
using the utility application, does the utility also save the tuning
parameters that the KAT500 was taught? That also brings up another question;
what can cause the KAT500 to "forget" the tuning parameters?
Best regards,
Jerry, W1IE
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.html Message
delivered to
[hidden email]
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.htmlMessage delivered to
[hidden email]