Hello Joe,
> Out portable yesterday - KX3 powered by an 8400mahr LiFe battery pack, which was fully charged that morning before I started operations. Antenna was a Buddipole vertical on 7119, SWR1.1, with j, C and L components all zero (ie on the antenna's resonant frequency). KX3 running at 15W out.
>
> After an hour of operating (SSB), the KX3 started to wander off frequency by a 1Khz on transmit. A contact noticed this during a QSO. The battery showed 13.1v at the time.
>
> I changed the battery, and with the new one the KX3 worked normally.
>
> Is this a low battery issue, or do I need to look elsewhere?
I use my KX3 down to 10 volts an lower without any frequency change.
I suspect rather great transitional resistance, especially when transmitting.
Are the wires from the accu to the KX3 thick enough?
Are the connectors are stable enough (no defective/intermittent contact)?
73/72 de Ingo, DK3RED - Don't forget: the fun is the power!
www.qrp4fun.de -
[hidden email]
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.html
Locked
