Don't Shoot!

[Richard-6]

Is there an RF overshoot problem using an IC-7300 with a KPA500?

Richard - W4KBX
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[Ken Winterling]

Richard,

If there is any overshoot, my KPA500 hasn't complained. I have both an
IC-7300 and an IC-7610.  The KPA500 is teamed with the KAT500.
The keying line is routed through the KAT500 and the rigs are both set for
a 15ms transmit delay.
I do not run an ALC line on either rig. The rig power is set to roughly
21%; adjusted slightly as necessary.

Ken
WA2LBI





On Wed, Jun 2, 2021 at 8:10 PM Richard <[hidden email]> wrote:

> Is there an RF overshoot problem using an IC-7300 with a KPA500?
>
> Richard - W4KBX
> _________________________________
>
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]