Download to KRX3 - problem

[Converse, Robert]

I'm having trouble downloading the DSP firmware to the KRX3.  Despite multiple attempts, in the  table Firmware Versions for K3 Serial Number 00162" , under "Installed in K3" still lists "N/A" for DSP2.   The KRX3 seems to work properly, and all other entries in the table seem to properly reflect what I downloaded.  I am using version 1.1.10.17 of the Mac K3 Utility.  Can't seem to find anything in the KRX3 manual or Utility instructions to cure this.  Any suggestions?  Thanks.

73,
Bob, WO3E

This e-mail message is intended only for individual(s) to whom it is addressed and may contain information that is privileged, confidential, proprietary, or otherwise exempt from disclosure under applicable law. If you believe you have received this message in error, please advise the sender by return e-mail and delete it from your mailbox. Thank you.
_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

[Dick Dievendorff]

N/A is displayed when the MCU thinks no KRX3 is enabled

Dick, K6KR


Sent from my iPhone

On Nov 27, 2008, at 15:07, "Converse, Robert" <[hidden email]
 > wrote:

> I'm having trouble downloading the DSP firmware to the KRX3.  
> Despite multiple attempts, in the  table Firmware Versions for K3  
> Serial Number 00162" , under "Installed in K3" still lists "N/A" for  
> DSP2.   The KRX3 seems to work properly, and all other entries in  
> the table seem to properly reflect what I downloaded.  I am using  
> version 1.1.10.17 of the Mac K3 Utility.  Can't seem to find  
> anything in the KRX3 manual or Utility instructions to cure this.  
> Any suggestions?  Thanks.
>
> 73,
> Bob, WO3E
>
> This e-mail message is intended only for individual(s) to whom it is  
> addressed and may contain information that is privileged,  
> confidential, proprietary, or otherwise exempt from disclosure under  
> applicable law. If you believe you have received this message in  
> error, please advise the sender by return e-mail and delete it from  
> your mailbox. Thank you.
> _______________________________________________
> Elecraft mailing list
> Post to: [hidden email]
> You must be a subscriber to post to the list.
> Subscriber Info (Addr. Change, sub, unsub etc.):
> http://mailman.qth.net/mailman/listinfo/elecraft
>
> Help: http://mailman.qth.net/subscribers.htm
> Elecraft web page: http://www.elecraft.com

_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

[conversr]

<quote author="Dick Dievendorff">
<<N/A is displayed when the MCU thinks no KRX3 is enabled>>

Thanks, Dick.  I have entered ANT=ATU in CONFIG/KRX3.  Is there something else I need to do to enable the KRX3?

73,
Bob, WO3E