Elecraft

Downloaded DSP1 revision "02.88". Radio responded with revision "00.00"

classic Classic list List threaded Threaded
♦
♦
 2 messages Options
RANDY DIDDEL
Reply | Threaded
Open this post in threaded view
♦
♦
|

Downloaded DSP1 revision "02.88". Radio responded with revision "00.00"

RANDY DIDDEL
Hi all,

I had disconnected my K3s to move some things behind the radio. When I plugged everything back in and powered back on, I got the ERR DSX. RTFM, I see that I needed to reload the firmware. I reloaded the firmware and the K3s Utility failed with Downloaded DSP1 revision "02.88". Radio responded with revision “00.00” Turned off and back on again and I am still getting ERR DSX.

Any suggested ideas?

73
K5RHD
/randy

Error list and results below:

09:20:48 Elecraft K3 Utility for OS X Revision 1.18.6.28
09:20:48 OS X Version 10.15.4
09:20:49 K3 MCU revision 05.67. RS-232 speed 38400 bps.
09:20:55 K3 MCU revision 05.67. RS-232 speed 38400 bps.
09:21:12 Connecting to ftp.elecraft.com. Please be patient, this takes a few seconds.
09:21:12 Connected to Elecraft server.
09:21:12 Your folder has the most recent K3 firmware files from Elecraft.
09:21:13 Ready
09:21:13 K3 MCU revision 05.67. RS-232 speed 38400 bps.
09:21:20 K3 MCU revision 05.67. RS-232 speed 38400 bps.
09:21:22 OS X Version 10.15.4
09:21:28 Sending firmware file "hmcu0567b.hex" to MCU
09:23:10 Loaded MCU firmware revision 05.67
K3 responded with revision 05.67
09:23:10 MCU firmware load is complete
09:23:10 Erasing Flash Memory
09:23:14 Sending firmware file "hfpf0126.hex" to FPF
09:24:45 FPF firmware load is complete
09:24:48 Sending firmware file "tboot8.hex" to DSP1
09:24:51 Sending firmware file "hdsp0288.hex" to DSP1
09:26:16 Sending firmware file "DTBL0014.HEX" to DSP1
09:30:39 DSP1 verification failed
09:30:47 DSP1 firmware load failed
09:30:48 K3 MCU revision 05.67. RS-232 speed 38400 bps.
09:30:48 Ready
09:31:02 K3 MCU revision 05.67. RS-232 speed 38400 bps.
09:31:05 New firmware is available for your K3
09:31:36 K3 MCU revision 05.67. RS-232 speed 38400 bps.
09:31:38 OS X Version 10.15.4
09:31:41 Sending firmware file "tboot8.hex" to DSP1
09:31:44 Sending firmware file "hdsp0288.hex" to DSP1
09:33:10 Sending firmware file "DTBL0014.HEX" to DSP1
09:37:34 DSP1 verification failed
09:43:35 DSP1 firmware load failed
09:43:36 K3 MCU revision 05.67. RS-232 speed 38400 bps.
09:43:36 Ready
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]
Nr4c
Reply | Threaded
Open this post in threaded view
♦
♦
|

Re: Downloaded DSP1 revision "02.88". Radio responded with revision "00.00"

Nr4c
I’m not sure why disconnecting the radio and reconnecting again should require a firmware reload.  

Did you try reloading the latest CONFIG file?

Sent from my iPhone
...nr4c. bill


> On Apr 11, 2020, at 11:46 AM, Randy Diddel <[hidden email]> wrote:
>
> Hi all,
>
> I had disconnected my K3s to move some things behind the radio. When I plugged everything back in and powered back on, I got the ERR DSX. RTFM, I see that I needed to reload the firmware. I reloaded the firmware and the K3s Utility failed with Downloaded DSP1 revision "02.88". Radio responded with revision “00.00” Turned off and back on again and I am still getting ERR DSX.
>
> Any suggested ideas?
>
> 73
> K5RHD
> /randy
>
> Error list and results below:
>
> 09:20:48 Elecraft K3 Utility for OS X Revision 1.18.6.28
> 09:20:48 OS X Version 10.15.4
> 09:20:49 K3 MCU revision 05.67. RS-232 speed 38400 bps.
> 09:20:55 K3 MCU revision 05.67. RS-232 speed 38400 bps.
> 09:21:12 Connecting to ftp.elecraft.com. Please be patient, this takes a few seconds.
> 09:21:12 Connected to Elecraft server.
> 09:21:12 Your folder has the most recent K3 firmware files from Elecraft.
> 09:21:13 Ready
> 09:21:13 K3 MCU revision 05.67. RS-232 speed 38400 bps.
> 09:21:20 K3 MCU revision 05.67. RS-232 speed 38400 bps.
> 09:21:22 OS X Version 10.15.4
> 09:21:28 Sending firmware file "hmcu0567b.hex" to MCU
> 09:23:10 Loaded MCU firmware revision 05.67
> K3 responded with revision 05.67
> 09:23:10 MCU firmware load is complete
> 09:23:10 Erasing Flash Memory
> 09:23:14 Sending firmware file "hfpf0126.hex" to FPF
> 09:24:45 FPF firmware load is complete
> 09:24:48 Sending firmware file "tboot8.hex" to DSP1
> 09:24:51 Sending firmware file "hdsp0288.hex" to DSP1
> 09:26:16 Sending firmware file "DTBL0014.HEX" to DSP1
> 09:30:39 DSP1 verification failed
> 09:30:47 DSP1 firmware load failed
> 09:30:48 K3 MCU revision 05.67. RS-232 speed 38400 bps.
> 09:30:48 Ready
> 09:31:02 K3 MCU revision 05.67. RS-232 speed 38400 bps.
> 09:31:05 New firmware is available for your K3
> 09:31:36 K3 MCU revision 05.67. RS-232 speed 38400 bps.
> 09:31:38 OS X Version 10.15.4
> 09:31:41 Sending firmware file "tboot8.hex" to DSP1
> 09:31:44 Sending firmware file "hdsp0288.hex" to DSP1
> 09:33:10 Sending firmware file "DTBL0014.HEX" to DSP1
> 09:37:34 DSP1 verification failed
> 09:43:35 DSP1 firmware load failed
> 09:43:36 K3 MCU revision 05.67. RS-232 speed 38400 bps.
> 09:43:36 Ready
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]
Free forum by Nabble Edit this page