Dual Radios Single Logging

[G4pelRoss]

Hello Forum.
I have two PC's "A" & "B" running on WIN 10.

I now have two Transceivers:

An Icom 7800 connected to PC "A" via a 232 port/USB serial
converter cable.
This enables my logging Program Logic 9 installed on PC "A" to read the frequency, mode, etc from the 7800.
LOgic 9's database is on PC "A".

I have an Elecraft K3s connect to PC "B" via their USB ports, and operate my Data modes (FlDigi)
Easypal, CW, Olivia, RTTY, ect, using PC "B".
However I have to*manually*  enter all the QSO's worked on the K3s into LOgic 9 on PC "A".

Retaining the USB link between the K3s and PC(B), I would like to connect a link between
the K3s and LOgic9 on PC "A", to input the frequency, mode, etc from the K3s QSO's.

I only use one radio at any one time, switching the PTT and antenna connection's manually.

Ross (G4PEL)

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[ayoshida]

Ross

I do not know how Logic 9 program works.

I am using Logger32 program. It supports 2 radios.

In my case K3 is configured as Radio-1 and IC7300 as Radio-2.

QSO can be logged on the same Logbook whichever Radio I use.

Logger32 supports RTTY, PSK31 etc with implemented MMTTY/MMVARI

engine, however does not support new digital mode, FT8, JT65 etc.

I use JTDX program for these new mode. When QSO is logged in JTDX

then QSO data is transferred to Logger32 via TCP and Logger32 log this QSO.



On 2017/10/04 17:48, G4pelRoss wrote:

> Hello Forum.
> I have two PC's "A" & "B" running on WIN 10.
>
> I now have two Transceivers:
>
> An Icom 7800 connected to PC "A" via a 232 port/USB serial
> converter cable.
> This enables my logging Program Logic 9 installed on PC "A" to read
> the frequency, mode, etc from the 7800.
> LOgic 9's database is on PC "A".
>
> I have an Elecraft K3s connect to PC "B" via their USB ports, and
> operate my Data modes (FlDigi)
> Easypal, CW, Olivia, RTTY, ect, using PC "B".
> However I have to*manually*  enter all the QSO's worked on the K3s
> into LOgic 9 on PC "A".
>
> Retaining the USB link between the K3s and PC(B), I would like to
> connect a link between
> the K3s and LOgic9 on PC "A", to input the frequency, mode, etc from
> the K3s QSO's.
>
> I only use one radio at any one time, switching the PTT and antenna
> connection's manually.
>
> Ross (G4PEL)
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to [hidden email]
>

--

73 deakija1nlx

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[Clay Autery-2]

Don't know your software, but I would (using HRD) attempt to set the database up in server mode such that the HRD clients on either machine could add records...
Perhaps your logging software uses a database method that would allow the same approach.


Sent from my Verizon, Samsung Galaxy smartphone
-------- Original message --------From: G4pelRoss <[hidden email]> Date: 10/4/17  03:48  (GMT-06:00) To: [hidden email] Subject: [Elecraft] Dual Radios Single Logging
Hello Forum.
I have two PC's "A" & "B" running on WIN 10.

I now have two Transceivers:

An Icom 7800 connected to PC "A" via a 232 port/USB serial
converter cable.
This enables my logging Program Logic 9 installed on PC "A" to read the frequency, mode, etc from the 7800.
LOgic 9's database is on PC "A".

I have an Elecraft K3s connect to PC "B" via their USB ports, and operate my Data modes (FlDigi)
Easypal, CW, Olivia, RTTY, ect, using PC "B".
However I have to*manually*  enter all the QSO's worked on the K3s into LOgic 9 on PC "A".

Retaining the USB link between the K3s and PC(B), I would like to connect a link between
the K3s and LOgic9 on PC "A", to input the frequency, mode, etc from the K3s QSO's.

I only use one radio at any one time, switching the PTT and antenna connection's manually.

Ross (G4PEL)

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[Ross Primrose]

This doesn't give you real-time logging, but fldigi can export your QSO
info as an ADIF file which you should be able to import into Logic 9. 
Better than manual ;)

73, Ross N4RP

On 10/4/2017 4:48 AM, G4pelRoss wrote:

> Hello Forum.
> I have two PC's "A" & "B" running on WIN 10.
>
> I now have two Transceivers:
>
> An Icom 7800 connected to PC "A" via a 232 port/USB serial
> converter cable.
> This enables my logging Program Logic 9 installed on PC "A" to read
> the frequency, mode, etc from the 7800.
> LOgic 9's database is on PC "A".
>
> I have an Elecraft K3s connect to PC "B" via their USB ports, and
> operate my Data modes (FlDigi)
> Easypal, CW, Olivia, RTTY, ect, using PC "B".
> However I have to*manually*  enter all the QSO's worked on the K3s
> into LOgic 9 on PC "A".
>
> Retaining the USB link between the K3s and PC(B), I would like to
> connect a link between
> the K3s and LOgic9 on PC "A", to input the frequency, mode, etc from
> the K3s QSO's.
>
> I only use one radio at any one time, switching the PTT and antenna
> connection's manually.
>
> Ross (G4PEL)
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to [hidden email]

--
FCC Section 97.313(a) “At all times, an amateur station must use the minimum transmitter power necessary to carry out the desired communications.”

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]