Dx Commander Settings for K3s

[Elecraft mailing list]

What are the
Baud
Word
Parity
Stop
DTR
RTS
Settings for the K3s

AJ4YA
Grady

Thanks

Sent from my iPad
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

Hello Grady,

The settings that I use for my K3 are as follows:
Baud: 38400
Word: 8
Parity: None
Stop: 2
DTR: Off
RTS: Off

73,
Dale WA8SRA

> What are the
> Baud
> Word
> Parity
> Stop
> DTR
> RTS
> Settings for the K3s
>
> AJ4YA
> Grady
>
> Thanks
>
> Sent from my iPad

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[Iain MacDonnell - N6ML-2]

On Fri, Sep 9, 2016 at 5:55 PM, Grady Harper via Elecraft
<[hidden email]> wrote:
> What are the
> Baud
> Word
> Parity
> Stop
> DTR
> RTS
> Settings for the K3s

Per the K3[S] Owner's Manual, 8 data bits (word length), no parity and
1 stop bit (but the stop bit setting is probably not really critical).
The baud rate should be set to match the K3's CONFIG:RS232 setting.
RTS and DTR should be set to "Off".

73,

    ~iain / N6ML
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]