Ken,
The manual says there is a missing echo from a DSP command. Reload the
DSP firmware (download a fresh copy from the Elecraft website, yours may
be corrupt). If that does not correct it, it is time to contact support.
73,
Don W3FPR
On 10/3/2012 1:56 AM, ken brookner wrote:
> I'm getting these errors intermittently--only twice now about a week
> apart. K3 seems to be working ok, including the SUB. I reloaded all of
> the firmware after the first instance. I'll leave the radio on while I
> eat dinner or something and when I come back a couple of hours later I
> might have this error. I'm using Dxlab's Commander to control the rig.
>
> K3 includes:
>
> KAT3-F
> K3/100-F
> KXV3A
> KRX3-F
> KBPF3 (2)
> KDVR3
>
> I built my first one, but had the factory build this one. What do these
> errors mean? K3 has the latest firmware available through the K3 utility.
>
> Thanks!
> Ken, KY5G
> ______________________________________________________________
> Elecraft mailing list
> Home:
http://mailman.qth.net/mailman/listinfo/elecraft> Help:
http://mailman.qth.net/mmfaq.htm> Post: mailto:
[hidden email]
>
> This list hosted by:
http://www.qsl.net> Please help support this email list:
http://www.qsl.net/donate.html>
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.html
Locked
