Hi
Following advices received on this list and from Gary at Elecraft support, I
corrected my "ERR 12V" problem this past weekend.
I put some photos and explanations on my blog. Explanations are in french,
but photos should speak by themselves. It's at
http://www.ferracci.org/?p=1525You'll see how damaged the 6 pins were on the PA connector. IMHO, this
problem worth being mentionned on Elecraft's "mods and enhancements" web
page.
Elecraft support promised to send me replacement connectors with an order of
other upgrades i'm going to place soon. I'm still worried by asking those
connectors, even gold-plated, to support 10-15Amps, so maybe i'll keep the
"power wire mod" even with replaced connectors. I'd like to make it easily
removable though, using "1 wire connectors" like those used on PL259 wires.
Questions:
- What is the "name" of the "black connectors" used for the PA jumper block
? (such connectors are everywhere, but i don't know their name)
- What is the "name" of the "1 wire connector" used on PL259 wires ?
By name, i mean something like "SUB-D", the name of their type, so that i
can search for them on farnell, radiospares, mouser etc. Sorry if i'm not
clear.
--
Laurent F1JKJ
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.html
Locked
