Elecraft

ERR DSE while xmit CW from K3 through xv144 @15w

Classic

List

Threaded

5 messages Options

Bob KD7YZ

ERR DSE while xmit CW from K3 through xv144 @15w

Howdy K3' people:

Was just siting here calling CQ (CW) on 144 with the transverter..

All of a sudden I wasn't calling CQ and the screen said :
E046068
ERR DSE or D5E, can't tell what the middle character is.

I had to power-reset to get back to calling CQ.

what's it mean?

--
73
KD7YZ Bob

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Don Wilhelm-4

Re: ERR DSE while xmit CW from K3 through xv144 @15w

Bob,

If you check the list of ERR codes in the back of the K3 manual, you
will find that an echo from a DSP command was not received.
The suggested correction is to reload the DSP firmware (and DSP2 if
applicable).

73,
Don W3FPR

On 3/9/2013 10:51 PM, KD7YZ Bob wrote:

> Howdy K3' people:
>
> Was just siting here calling CQ (CW) on 144 with the transverter..
>
> All of a sudden I wasn't calling CQ and the screen said :
> E046068
> ERR DSE or D5E, can't tell what the middle character is.
>
> I had to power-reset to get back to calling CQ.
>
> what's it mean?
>

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Bob KD7YZ

Re: ERR DSE while xmit CW from K3 through xv144 @15w

Hi Don,

> The suggested correction is to reload the DSP firmware (and DSP2 if
> applicable).

thank you Don.
--
73
KD7YZ Bob

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Bob KD7YZ

Re: ERR DSE while xmit CW from K3 through xv144 @15w

>> The suggested correction is to reload the DSP firmware (and DSP2 if
>> applicable).

> thank you Don.

seems to have worked by doing updates and so forth.
--
Best regards,
Bob KD7YZ Win7-64bit + K3

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Bob KD7YZ

Re: ERR DSE while xmit CW from K3 through xv144 @15w again

In reply to this post by Don Wilhelm-4

On Sunday, Don () sent on an old
Straight Key:

> Bob,

> The suggested correction is to reload the DSP firmware (and DSP2 if
> applicable).

As I said, I did the 2 .. used cw on the transverter for a while. Back to
144 CW again and Just got the error message again.

--
73,
Bob KD7YZ
www.denstarfarm.us/LGD

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html