ERR DVR More Info

[Larry Boekeloo]

Ever since I updated to the new versions, I get an ERR DVR message at power up.
NO DVR INSTALLED either

Serial number 5278
MCU 5.14FPF  1.19DSP  2.83
If I hit the config button after power up, the error goes away and doesn't return until the next power up.
Anyone else have this issue or was there a resolution that I didn't see?
Thanks.
Larry, KN8N
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[Don Wilhelm-4]

Larry,

Check the CONFIG menu.  If it is set to KDVR3 NOR, then the K3 is
expecting the KDVR3 to be installed.  If it is not installed, you will
receive an error.  Set the CONFIG KDVR3 setting to "not inSt" if the
KDVR3 is not present.

73,
Don W3FPR

On 3/23/2015 6:51 PM, Larry Boekeloo wrote:
> Ever since I updated to the new versions, I get an ERR DVR message at power up.
> NO DVR INSTALLED either
>
> Serial number 5278
> MCU 5.14FPF  1.19DSP  2.83
> If I hit the config button after power up, the error goes away and doesn't return until the next power up.
> Anyone else have this issue or was there a resolution that I didn't see?
>

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[Larry Boekeloo]

Thanks Don - you are such a wealth of information.

Cockpit error as they say (as usual).

:)
Larry, KN8N
 


     On Monday, March 23, 2015 7:09 PM, Don Wilhelm <[hidden email]> wrote:
   

 Larry,

Check the CONFIG menu.  If it is set to KDVR3 NOR, then the K3 is
expecting the KDVR3 to be installed.  If it is not installed, you will
receive an error.  Set the CONFIG KDVR3 setting to "not inSt" if the
KDVR3 is not present.

73,
Don W3FPR

On 3/23/2015 6:51 PM, Larry Boekeloo wrote:
> Ever since I updated to the new versions, I get an ERR DVR message at power up.
> NO DVR INSTALLED either
>
> Serial number 5278
> MCU 5.14FPF  1.19DSP  2.83
> If I hit the config button after power up, the error goes away and doesn't return until the next power up.
> Anyone else have this issue or was there a resolution that I didn't see?
>



 
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]