The DVR is the Digital Voice Recorder. If you don't have one, maybe it got toggled to on with the power failure. If KDVR3 is set to nor and the KDVR3 is not installed it can cause an ERR. Probably other things can too. I have the KDVR3 installed, but I am far from expert at operating it.
Willis 'Cookie' Cooke
K5EWJ
________________________________
From: W5UN <
[hidden email]>
To:
[hidden email];
[hidden email]
Sent: Wed, December 23, 2009 8:10:25 PM
Subject: [Elecraft] ERR DVR
Today I lost power here at my home. When it was restored, I turned on
my K3 and was greeted with the ERR DVR message. What does this mean?
I do not see it listed in the Error Message list of the manual. The
radio appears to be working.
For LP-PAN users:
I now no longer see the panadaptor signal on my PowerSDR screen,
although I can still control the K3 frequency and mode from the
PowerSDR screen. I wonder if this is related to the error message?
Rebooting the LP_Bridge computer and LP-PAN did not cure the problem.
Has anyone here run into this situation? I'm at a loss to figure out
what is going on.
Dave, W5UN
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.html
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.html
Locked
